The Overlander Forum • Worktop
Page 1 of 1


Posted: Thu Mar 14, 2019 11:04 am
by bromleyxphil
Hi Guys
I want to put a lift up worktop on the left side of the picture then be able to ledge/connect it to the wall on the right. Question is how, the worktop willbrush the right hand wall when lifting up

Re: Worktop

Posted: Thu Mar 14, 2019 9:31 pm
by Ivan C
You could hinge it on the lh side and have a couple of shot bolts which go into the rh wall to keep it up.
Or you could have a batten on each side and a lift out panel.
Obviously in each cae the panel will have to have clearance to allow hingeing/lifting out
Depends how involved you want to make it............
Ivan C